Master of Puppets Preset name: master of puppets test 1 Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Soft} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 10"Tone" = 50"Level" = 100} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -25"A-Level" = 55"B-Bypass" = Off"B-Pan" = 25"B-Level" = 55"A-Delay" = 0"B-Delay" = 0"Width" = 0 'A' branch: { Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 60"Bass" = 30"Middle" = 45"Treble" = 60"Presence" = 40"Master" = 60"Level (dB)" = -1} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Master of Puppets _IR"Low Cut (Hz)" = 80"Hi Cut (kHz)" = 7.5"Mix" = 100"Level (dB)" = -1} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Mesa Rectifier (4x12")"Mic Position" = Edge"Mic Distance" = Near"Low Cut (Hz)" = 75"Hi Cut (kHz)" = 8.0"Mix" = 100"Level (dB)" = -1} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -6"62 Hz" = 2"125 Hz" = -2"250 Hz" = -5"500 Hz" = -3"1 kHz" = 1"2 kHz" = 3"4 kHz" = 4"8 kHz" = 1"16 kHz" = -5"Level (dB)" = 0} } 'B' branch: { Effect: "Mesa Rect" (Amp simulators), active - "yes" { "Gain" = 70"Bass" = 25"Middle" = 34"Treble" = 70"Presence" = 45"Master" = 70"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Master of Puppets _IR"Low Cut (Hz)" = 70"Hi Cut (kHz)" = 9.0"Mix" = 100"Level (dB)" = 0} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Marshall 1960A (4x12")"Mic Position" = Edge"Mic Distance" = Near"Low Cut (Hz)" = 80"Hi Cut (kHz)" = 9.0"Mix" = 100"Level (dB)" = 0} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -6"62 Hz" = 4"125 Hz" = -2"250 Hz" = -4"500 Hz" = -5"1 kHz" = -3"2 kHz" = 4"4 kHz" = 5"8 kHz" = 3"16 kHz" = -4"Level (dB)" = 0} } } Note: You will need to download and install the ToneLib-GFX software to use the preset.
