Bartolini BH2 and Ibanez bassDevice: Zoom B1 Four Firmware: 2.00 Name on device: EV_BH2 Optimized for: Phones/Speaker Effects chain: see below Patch comments: We read (and hear) that Bartolini BH2 pickups are darker and without a brighter top end. I bought an Ibanez SRMS625EX-BKF (with those PickUps) and confirmed some of that. Spoiler: Bass Guitar settings "Active EQ" = ON "3-Way Mid Frequency" = 700Hz "Bass" = 50% "Mid" = 50% "Treble" = 50% "Balance" = 50% "Volume" = 65% Plus, with our wonderful Zoom B1/B1X Four, we can bring more clarity, and even get more flexibility with some other effects: Spoiler: Patch settings Effect: "Zoom Noise Reduction" (Dynamics), active - "yes" "Detect" = GTRIN "Depth" = 100% "Threshold" = 50 "Decay" = 10ms Effect: "Darkglass Electronics Microtubes B7K" (Overdrive / Distortion), active - "yes" "Bass" (Low: 100Hz) = 55 "L-MID" (Low-Mids: 1KHz) = 50 "H-MID" (High-Mids: 3KHz) = 50 "Treble" (High: 5KHz) = 50 "Blend" (Mix) = 55% "Gain" (Drive) = 30-65% "VOL" (Level) = 55% "Boost" = LO+HI Effect: "SWR SM-400" (Amp simulator), active - "yes" "Bass" = 3.0db "MID-F" = 250Hz "Middle" = -8.0db "Treble" = 0.0db "Gain" (Drive) = 35% "Enhance" (Aural) = 10% "Volume" = 70% "Blend" (Mix) = 100% Effect: "DBX 160A Compressor" (Dynamics), active - "yes" "Threshold" = -22db "Ratio" = 4 "Knee" = Hard "Volume" = 80% Patch Volume: 100 DSP Load: 92% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
